Wall-Mounted Applications

Install on concrete and brick walls to detect an intruder attempting to break through the wall.

V-ALERT Intrusion Detection System

The V-ALERT INTRUSION DETECTION SYSTEM consists of FENCE or WALL mounted sensors that detect small changes in movement caused by intruders attempting to CUT through the fence fabric, CLIMB over the fence, or in the case of wall-mounted systems, attempts to BREAK THROUGH the wall.

Unique Product Attributes

• N0 Moving Parts
  Electronic card inside epoxy housing - Parts do not wear out over time.
• 3 Meter Detection Resolution
  Sensors have separate identities, enabling alarm detection to EACH SENSOR.
• Installed on Electric Fencing Wires & Walls

SYSTEM

Description
The system consists of a sensor cable consisting of V-Alert sensors spaced 3 m apart (standard configuration) connected to a Zone Processor Unit. The zone processor card typically controls 2 separate sensor lines each consisting of 50 sensors

EDC Technology
Electronic Detection Capability – no reliance on moving parts to create detection data.

False Alarm Rate
The EDC Technology monitors the status of each sensor while the Zone Processor Unit analyzes and compares the data from each individual sensor. The system detects changes in the status of each sensor in comparison with adjacent sensors, thereby enabling an accurate and reliable alarm detection capability.

Advanced signal processing achieves a high level of detection probability while eliminating false alarms from extraneous cable vibration (wind, etc.), or direct mechanical vibrations from non-intruder sources.